Description

- 4X LED Load Resistor(+8x T-Taps)
- These 6 Ohm, 50 Watt resistors can be connected across the indicator bulbs to simulate the load of a normal incandescent bulb.
- Solution for "bulb out signal" / "OBC error message" after installing SMD LED bulb
- Solution for fast flasher response after installing SMD LED bulb
- Installation is easy. Just connect the wires with the provided splice taps, no wire cutting necessary
- Universal fit, this product will fit any car, SUV, 4wd or truck.
- Simply tap the load resistors between the positive and negative wires of the turn signal bulb and this will solve LED-related turn signal problems such as hyper flashing, no flashing or burnt out bulbs.
- Power: 50W
- Resistance: 6 ohm
- Dimensions: Approx. 5 x 2.2 x 1.7 cm (1.97 x 0.9 x 0.6 inch)
- Connection Instruction:
- One resistor is required for each LED indicator bulb. Connect one wire to the ground and the other to the turn/brake wire. You can use the T-connectors so that you do not have to cut your car's wiring.
- A load resistor is required for each indicator bulb. For more details please refer to the wiring diagram in our product picture.
- Note:
- These load resistors may get Hot. Please mount them on a metal surface and not in contact with any plastic parts.
- Common Part Number Cross Reference Part Number :
1157 BA15s 1016 1034 1076 1130 1154 1157 1158 1493 2057 2357 2397 7528 1156 BAY15d 1073 1093 1129 1141 1156 1159 1295 1459 1619 1651 1680 7506 S25 7527 7507 BAU15s PY21W 7443 7444 7443 7441 7440 T20 7440 992A 7440 (A refers to Amber) T20 3157 3057 3155 3357 3457 4157 3156 3056 3456 4156

Package:

- 4 x Load Resistor
- 8 x T-Taps

Notes:

1. Please allow slight chromatic aberration in the photo
2. Due to manual measurement, the size may deviate

4X 50W Led Load Resistor 12V Lights Front Rear Indicator Hyper Flash Car 4Wd Ute

Product form

$18.07 $10.82

Free pickup in our shop(s)

Earn AimallPoints! (100 AimallPoints Equal $1) 1,00 AimallPoints = AUD $1
e.g. (Your AimallPoints) X 0.010 = AUD$ Value

* AimallPoints can be redeemed (on your account page) and applied to your next purchase.

    • Guaranteed secure & safe checkout.

      paypal
    Free Shipping over $29Free Shipping over $29

    Free Standard Shipping over $29 within Australia (excl. bulky items*).

    Standard Shipping Within Australia- Flat Rate $6 below $29

    Express shipping within Australia (excl. bulky items*) - Flat rate of $10 for orders below $29 and $13 for order over $29

    Most products are shipped by Australia Post, Sendle, PFL Logistics, and Courier Please.

    Return & ExchangeReturn & Exchange

    For products you are not satisfied with, we have a 30-day return and exchange policy. This means you
    have 30 days from receiving your item to request a return or exchange. Once we have received and examined your return, we will notify you and let you know whether to approve a refund or an exchange. lf you opt for a refund, you can then re-purchase the new product to make sure you get what you want. lf you choose an exchange, we will process it and send you the new product as soon as possible.

    Handling TimeHandling Time

    Standard delivery usually takes 2-6 business days depending on your parcel destination (8
    10 business days for western states and remote areas).
    Depending on your parcel destination, express delivery usually takes 1 - 5 business days.
    Please expect delays on holidays or during high-volume seasons.

    Description

    - 4X LED Load Resistor(+8x T-Taps)
    - These 6 Ohm, 50 Watt resistors can be connected across the indicator bulbs to simulate the load of a normal incandescent bulb.
    - Solution for "bulb out signal" / "OBC error message" after installing SMD LED bulb
    - Solution for fast flasher response after installing SMD LED bulb
    - Installation is easy. Just connect the wires with the provided splice taps, no wire cutting necessary
    - Universal fit, this product will fit any car, SUV, 4wd or truck.
    - Simply tap the load resistors between the positive and negative wires of the turn signal bulb and this will solve LED-related turn signal problems such as hyper flashing, no flashing or burnt out bulbs.
    - Power: 50W
    - Resistance: 6 ohm
    - Dimensions: Approx. 5 x 2.2 x 1.7 cm (1.97 x 0.9 x 0.6 inch)
    - Connection Instruction:
    - One resistor is required for each LED indicator bulb. Connect one wire to the ground and the other to the turn/brake wire. You can use the T-connectors so that you do not have to cut your car's wiring.
    - A load resistor is required for each indicator bulb. For more details please refer to the wiring diagram in our product picture.
    - Note:
    - These load resistors may get Hot. Please mount them on a metal surface and not in contact with any plastic parts.
    - Common Part Number Cross Reference Part Number :
    1157 BA15s 1016 1034 1076 1130 1154 1157 1158 1493 2057 2357 2397 7528 1156 BAY15d 1073 1093 1129 1141 1156 1159 1295 1459 1619 1651 1680 7506 S25 7527 7507 BAU15s PY21W 7443 7444 7443 7441 7440 T20 7440 992A 7440 (A refers to Amber) T20 3157 3057 3155 3357 3457 4157 3156 3056 3456 4156

    Package:

    - 4 x Load Resistor
    - 8 x T-Taps

    Notes:

    1. Please allow slight chromatic aberration in the photo
    2. Due to manual measurement, the size may deviate

    Customer Reviews

    Based on 2 reviews
    50%
    (1)
    50%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    r
    ronboz

    Thanks

    b
    bryamcevo

    Great product works awesome thanks.

    Frequently Asked Questions

    When will my order be delivered?

    Your order will be carefully packaged and delivered to your desired location. All orders will be processed within 1 to 2 business days after receiving the order confirmation email (excluding weekends and holidays). Once your order is shipped, you will receive another notification.

    Can I return my product?

    We have a 30 day return policy, which means you have 30 days after receiving your item to request a return. For all return requests, see our refund police.

    What can I do if my item (or part of it) is damaged?

    Please check your order upon receipt and contact us immediately if the item is defective, damaged or if you have received the wrong item. Please send a photo of the item together by email. We will resolve the issue as soon as possible.

    You do not have to pay for return shipping.

    Copyright © 2025 Aimallestore Australia. All rights reserved. ABN 68 601 572 043

      • American Express
      • Apple Pay
      • Google Pay
      • Mastercard
      • PayPal
      • Shop Pay
      • Union Pay
      • Visa

      Login

      Forgot your password?

      Don't have an account yet?
      Create account